Grundfos BMS must be disposed of according to local regulations by using a public or private waste collection service. If this is not possible, contact the nearest Grundfos company or service workshop.
This information is only related to the sleeve, thrust bearing housing and coupling – for end-of-life information about the motor, drive and pump please look up the items itself.
Safety risk related to materials used
- There is no risk to people during the disassembly process posed by the materials used in the product.
Safety risk related to handling the product
- Care should be taken when handling the items due to the weight.
Disassembly of the product
The main materials of the components are:
- Cast iron
- Stainless steel.
and can therefore be recycled to a large extent – depending on the national possibilities for recycling.
|Designation||Name||Material||Special disassembly considerations|
|1||Shaft w/thrust bearing||Stainless steel/ceramic|
|3||Housing for thrust bearing||Super Duplex stainless steel|
|4||Thrust bearing CPL||Stainless steel/carbon|
|5||Pin||Super Duplex stainless steel|
|6||Housing for shaft seal||Super Duplex stainless steel|
|7||Housing for bell||Cast iron GG25|
|8||Coupling spline||Impax Supreme|
|9||Shaft bushing D55||CK45|
|10||Axial bearing||Acoflon 214G|
|11||Shaft seal||Ceramic/silicon carbide|
|12||Sleeve||Duplex stainless steel|