Grundfos COMFORT must be disposed of according to local regulations by using a public or private waste collection service. If this is not possible, contact the nearest Grundfos company or service workshop.
- Safety risk related to materials used
There is no risk for people during the disassembly process posed by the materials used in the product.
- Safety risk related to handling the product
Care should be taken when handling the pump due to the weight.
- Caution: Persons with pacemakers who disassemble this product shall exercise care when handling magnetic materials embedded in the rotor.
Disassembly of the product
The main materials of the components are:
- Electronic scrap
- Composite materials
and can therefore be recycled to a large extend – depending on the national possibilities for recycling.
The pump is assembled by using screws and snap lock and can be disassembled with standard tools. There are no loose parts inside the motor.
|Pos. No||Designation||Material||Special disassembly considerations|
|2||Stator windings||Copper wire and enamel|
|4||Capacitor||Metallised PP film|
|5||Contact for pc board||Tin-plated brass|
|6||Retainer for pc board, lower||PA66/6|
|7||Retainer for pc board, upper||PA66/6|
|8||Spherical separator||Stainless steel|
|9||Rotor can complete||Stainless steel/tungsten carbide|
|10||Rotor, impeller||Stainless steel, EPDM, PPO, PTFE, graphite|
|11||Pump housing||Brass MS 58|
|12||Terminal box cover||PC/ABS|
|13||PC board with diode||FR 4|
|19||Insulating cover||EPP 55|
|21||Cable reel 1||PC/ABS|
|22||Cable reel 2||PC/ABS|